chromaPID : BTEX analyzer with PID detector
A GC PID for automatic monitoring of compounds, in air, water or soils.
Principle
- Automatic sampling using a loop
- Automatic loop injection on metallic capillary column
- Isothermal gas chromatograph
- Detection of all compounds eluting from the column performed by PID detector 10.6 eV.
- Self cleaning of the lamp for high stability
Key points:
- Continuous monitoring with automatic online sampling
- This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column.
- It has a minimum detection level of ppb.
- Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19″ rack 4U.
- Isothermal oven in standard (programmed gradient temperature in option) : pressure/flow control of the carrier gas by the-valve.
- Before final delivery the analyser is tested for one week by the quality control department.
- Photo ionisation detector (PID), 10,6 eV lamp in standard.
- Other lamps on request.
- Self-cleaning of the lamp for high stability.
- 0….1 V analogue output (contact) for the purpose of low or high alarms on the concentrations of the analysed compounds.
- Bi-directionnal RS-232 to transfer data and results to the computer.
- Analytical performances: Specific, linear and very sensitive to Volatile Organic Compounds
- Results validation by automatic standard injection
- Low gas consumption, can be reduced in option
- More than 10 years data storage
- No cylinders required thanks to internal calibration tube and gas generators
- Automatic control with process device
- Intelligents system with tunable and interactive alarm levels
- Powerful VISTACHROM Chromatotec® software: Remote monitoring & injection control
- Full traceability with on board archiving of results and chromatograms
- QC Set up and control of threshold alarms
- Data export by MODBUS / 4-20 mA / 0-10 V
- Time stamp results
Options
- Wall mounted cabinet
- MODBUS RTU or TCP/IP communication protocol
- One module for 4 x Analog output 4-20 mA or 0-10 V
- 24 V power supply for transportable analyzers
- Multiple stream selector (2 to 10).
- Nitrogen generator nitroxychrom (XXX913CS)
- CALIB with Benzene permeation tube
- Explosion proof version Exp for ATEX, IECEx, Zone 1 and 2 and also for CSA C1D2
- Internal electric heater and/or cooler for temperature regulation of the Exp cabinet with thermal insulation
- Liquid sample system with purge for Sulfurs extraction from liquid phase (XXPurge ED Ex)
- Temperature gradient GC oven for multicomponents analysis
- Touch screen for wall mounted cabinet
Review chromaPID
There are no reviews yet.