Hệ thống phân tích NO2-NOx-NO ICAD Series 210DL

ICAD NO2-NOx-NO Analyzer SERIES 210DL

Patented, fast, accurate and direct nitrogen dioxide detection

9 ₫

ICAD NOx monitors deliver precise and rapid measurements of nitrogen oxides (NO and NO2). Independent of calibration gases, ICAD instruments are versatile, suitable for both stationary laboratory and mobile applications (cars, ships, drones). With an optional built-in CO2 sensor, ICAD enables real-time on-road emissions monitoring using plume-chasing techniques.

ICAD Advantages

Precise NOx measurements: sub ppb sensitivity, high sampling rate
Direct NO2 detection: free of cross sensitivities
NO2 calibration gas not required: intrinsic NO2 calibration by molecular absorption cross section data
Mobile and robust configuration available: temperature stabilized, IP67 rating, light weight, compact, low power consumption, optional battery operation
Optional CO2 extension for emission measurements (e.g. automotive NOx emission factors)
Connectivity: Wi-Fi, LAN, RS232, graphical user interface included

Category: Uncategorized

The ICAD Series 210DL NO2-NOx-NO Analyzer is a precise and rapid measurement device for NO2 and NO gases. Leveraging ICAD technology, it enables direct NO2 detection without the need for gas calibration, ensuring high stability, ease of use, and low maintenance requirements. The Series 210 model offers enhanced accuracy, temporal resolution, and self-diagnostic capabilities.

Direct NO2 Detection

Iterative Cavity DOAS (ICAD) spectroscopy
High-resolution spectroscopic NO2 detection from 430 to 480 nm using the NO2 spectrum fingerprint
No observed interferences, e.g., water, glyoxal, ozone
No sample drying required (e.g., Nafion tubing)

NOx Measurements by Internal Conversion

Patented, NOx-free ozone generator for NO conversion
Dual measurement cells for parallel NO2 and NO detection

Long-Term Stability and Robustness

Insensitive to temperature and vibrations
Independent from absolute light source intensity
No zero-point drift, integrated zero measurement

Easy Setup and Operation, Low Maintenance

No gas calibration required, minimal maintenance effort
Controllable via Wi-Fi devices (PC, tablet, smartphone)
Multiple data communication protocols
19” rack
Sustainable: Long lifetime, low power consumption

Series 210 New Features

System health user interface and on-board diagnosis
Easy adjustment of span calibration in user interface
Enhanced time resolution of 1 second
Improved accuracy at high concentrations
Improved long-term stability

Graphical User Interface and On-Board Diagnostics

The intuitive graphical user interface enables effortless operation and swift access to advanced features and data trends. The ICAD can be remotely controlled and monitored via any Wi-Fi-enabled device (PC, tablet, smartphone) without requiring additional software. A detailed system health dashboard provides real-time status updates of crucial sensor data (e.g., gas flow, power supply, temperature), facilitating efficient on-board troubleshooting.

ICAD MODEL OVERVIEW

Download

ICAD PRODUCT AND ACCESSORIES LIST

Download

ICAD MODEL CONFIGURATION GUIDE

Download

STANDARD ICAD MODELS

Download

HIGH PRECISION ICAD

Download

SHIP EMISSION MEASUREMENTS

Download

ON-ROAD VEHICLE EMISSIONS (PLUME CHASING)

Download

Product reviews

Review ICAD NO2-NOx-NO Analyzer SERIES 210DL

5 0% | 0 review

4 0% | 0 review

3 0% | 0 review

2 0% | 0 review

1 0% | 0 review

Write a review

Review ICAD NO2-NOx-NO Analyzer SERIES 210DL

There are no reviews yet.

No comments yet

Specification	Value
Measurement Range	0 – 2000 ppb
Time Resolution	1 sec minimum temporal averaging
Limit of Detection (2σ)	0.03 ppb at 60 sec
Precision (1σ)	0.12 ppb at 1 sec; 0.02 ppb at 60 sec
Detection of NO₂	Direct ICAD spectroscopy
Detection of NO / NOₓ	By conversion to NO₂
Response Time (10% to 90%)	1 sec at 2 l/min
Zero Drift	Less than 0.1 ppb/month²
Sample Flow	1 to 2 l/min
Path Length Characterization	Helium (every 1 to 2 years, optional) or NO2 reference measurement or Gas free ICOM3 method
Calibration	NO: calibration gas not needed; NO gas for converter calibration above 1000 ppb (every 12 months)
Other Detectable Gases	Glyoxal, CO₂ (optional NDIR sensor)
Mechanical Stability	Insensitive to vibrations
Power Consumption	Less than 40 W at 12 V (typ.)
Processing Unit	Internal embedded PC, with data analysis and measurement software
Temp. Range of Operation	-10 to +40°C
Temperature Sensitivity	Less than 0.01 ppb/°C
Cross Sensitivity	No significant cross sensitivity5
Weight	Less than 12 kg (depending on config)
Consumable Gases	No gases needed for operation
Dimensions	19″ rack housing: 43.8 x 13.3 (3HU) x 66.5 cm
Data Communication	LAN/WI-FI/RS232/M2M/OPCUA; Bayern-Hessen Protocol; Volt./Current Output
Start-up Time	Less than 1 min (typ.)
Model Variations	ICAD-NO₂-210L (NO only); ICAD-NOX-210DL (NO + NO₂)

ICAD-NOx-200D(L)	ICAD-NOx-200DM	ICAD-NOx-200DC
19″ RACK HOUSING FOR LAB AND MOBILE APPLICATIONS L-VERSION FOR ENHANCED SENSITIVITY	RUGGED AND WATERPROOF PERFECT FOR STATIONARY AND MOBILE FIELD APPLICATIONS	COMPACT AND LIGHT-WEIGHT FOR UAV APPLICATIONS