Profiling Current Meter and Wave

Profiling Current Meter and Wave - The optimal solution to measure current, speed, direction, and water quality in one instrument

Model: SeaGuardII DCP Wave

Manufacturer: AANDERAA

Made in Nauy

Profiling Current Meter and Wave – The optimal solution to measure current, speed, direction, and water quality in one instrument.

Simple solution to measure waves, currents and water quality in one instrument

  • Independent measurement of waves and currents.
  • Field validated data-comparison with MOTUS buoy, Datawell Waverider and pressure based non directional wave sensor
  • Measures wave from centimeters to 20m
  • 2Hz or 4Hz wave sampling
  • Processing of up to three columns in parallel, provides flexible setup with both surface referred and bottom referred cells.

Adaptive pulse technology automatically optimizes wave measurement accuracy. The transmission pulse is automatically adapted to the current sea conditions to provide best measurement achievable; a low noise broadband mode is used for smaller waves, an extended range broadband mode used for medium range waves and a narrowband mode is applied for higher waves.

Category:

The SeaGuardII DCP Wave is a 600kHz Doppler Current Profiler able to measure directional wave parameters and currents from a bottom mounted installation.

The Acoustic Wave software 5759 used by the DCPS implements unique features to improve the wave measurement accuracy by optimizing the signal to noise ratio.
Maximum deployment depth is 40m in normal scatter conditions. The Profiling Current Meter and Waveis available as a self-recording instrument. It can be easily integrated into a real-time system offering reliable two-way communication.

Redundant wave measurement for QA/QC can be implemented by adding the wave and tide sensor 5218.

Applications

  • Navigation safety
  • Prediction and modelling
  • Energy assessment
  • Infrastructure design
  • Coastal processes, erosion
  • Oil & Gas

The optimal solution to measure directional waves, currents and water quality in one instrument

  • Real-time or self-recording with on-board processing of current and wave parameters from a bottom installation
  • Independent measurement of waves and currents with flexible set-up
  • A wide range of parameters available using Aanderaa plug and play smart sensors
  • Easy integration of third-party sensors
  • Adaptive pulse technology optimizing wave measurement accuracy

Innovative technology to ensure accurate low noise wave measurement

  • Covers the complete wave range (0.2m to 20m) without sacrificing accuracy
  • Automatically switches between two broadbands and one narrowband mode depending on wave height
  • Samples waves at 2Hz or 4Hz with a configurable integration interval from 5 to 30 minutes
  • Field proven and validated data

Comparison and validation using three other methods for wave measurement, including surface buoys

  • Possibility to integrate a wave pressure based sensor for redundant measurement and quality assurance
  • Most efficient current and wave profiler on the market offering ease of use and proven data quality
  • Maximum deployment depth of 40m
Velocity profile measurement  
Acoustic frequency 600 kHz
Typical profiling range 30 – 70 m (Broadband)

35 – 80 m(Narrowband)

Cell size 0.5 m – 5 m
Velocity range 0 – 500 cm/s (Narrowband)

0 – 400 cm/s (Broadband)

Velocity accuracy 0.3 cm/s or ±1% of reading
Velocity resolution 0.1 cm/s
Blanking zone 1m
Wave measurement  
Hieght wave  
Range 0.2m – 20m
Resolution 1cm
Accuracy ± 5cm or <1% of value
Direction wave  
Range 0-360°
Resolution 0.1°
Accuracy <2°
Power options  
External power supply 12-30V
Internal battery 02 pin Lithium 7V, 35Ah
Communication and recording  
Data storage 2GB SD Card /remote download
Configuration interface USB/RS232/RS422
Recording interval From 30 sec to 3 hrs
Environmental  
Depth rating 300m
Operating temperature -5 to +40°C5 to +40°C
Dimensions D: 160mm H: 585mm
Weight 10.8 kg
Materials PET, PUR, Titanium, Stainless steel 316, polyurethane

Accessories

  • SeaGuard Studio
  • SD card: 2 GB
  • Equipment bracket
  • Tide and wave sensor (5218)

Product reviews

Review Profiling Current Meter and Wave

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review Profiling Current Meter and Wave
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    Related products

    Bộ ghi dữ liệu áp suất tức thời PIPEMINDER-ONE External

    PIPEMINDER-ONE External Transient Pressure Data Logger

    Suitable for wastewater, enables asset monitoring, pump performance alerts and more
    Find out more
    Bộ ghi dữ liệu áp suất PIPEMINDER-ONE Standard

    PIPEMINDER-ONE Standard Pressure Transient Data Logger

    High-resolution pressure data recording provides instantaneous and burst pressure detection
    Find out more
    Bộ ghi dữ liệu cảm biến âm thanh PIPEMINDER-ONE

    PIPEMINDER-ONE Acoustic Sensor Data Logger

    Combines acoustic and pressure monitoring for precise leak
    Find out more
    Máy nén khí cho đầu dò và cảm biến quang phổ

    Air Compressor for Spectrometer Probes and Sensors

    Provides compressed air for oxilyser, solilyser, ammolyser and spectrometer probes
    Find out more
    Thiết bị đo clo di động ChlorNet

    ChlorNet Portable Chlorine Monitor

    Provides mobile, accurate, reliable and real-time chlorine data
    Find out more
    Thiết bị đo khí Chlorine Dioxide Q45H/65

    Q45H/65 Chlorine Dioxide Transmitter

    Online water quality monitoring and control of industrial disinfection systems
    Find out more
    Thiết bị đo ozone hòa tan Q45H/64

    Q45H/64 Dissolved Ozone Transmitter

    Online water quality monitoring and control of ozonation system
    Find out more
    Thiết bị đo độ dẫn điện kiểu Toroidal Q45CT

    Q45CT Toroidal Conductivity Transmitter

    Find out more

    Subscribe to Content

    If you need to copy the content, please leave your information, and we will respond as soon as possible. Sincerely, thank you!