CS230-L SDI-12 Temperature Profiler

When power is supplied to the CS230 probe, the internal electronics will continuously measure the temperature at an approximate rate of 1 measurement per second. Every output measurement obtained from the sensor is a running average of 10 consecutive 1-second readings. The accuracy specification is based on an average of 10 consecutive readings. For this purpose, after initial power-up, it is recommended to delay 10 seconds to obtain the best accuracy. 

Because the sensor is obtaining a measurement every 1 second, it is recommended to use the Continuous measurement command to obtain the temperature readings. Using the “R” commands will reduce the time taken to obtain a reading with the SDI-12 protocol. 

Benefits and Features 

• • Lifetime min/max temperature recording 
  • Customizable measurement spacing for any number of applications 
  • Available external probes simplify installation for roadbed applications 
  • User-resettable min/max temperature recording 
  • Automatic 1 second temperature update 
  • Makes use of the included SGB3 to protect against electrical surges 
  • One SDI-12 channel is used to connect all temperature sensors 
  • Low power—suitable for remote applications 
  • No calibration required 
  • Serial number & installation depth data for each location stored onboard each sensor 
  • Excellent long-term stability of measurements 
  • Comprehensive measurement range