Cảm biến đo mực nước và nhiệt độ nước CRS456V 
Cảm biến đo mực nước CRS456V 
Cảm biến đo mực nước và nhiệt độ nước CRS456V 
Cảm biến đo mực nước CRS456V 

CRS456V Titanium Vented Stand-Alone Pressure Transducer

Pressure Transducer Combined with a Recorder, High resolution and accuracy

9 ₫

The CRS456V consists of a submersible water-level and water-temperature sensor with its own time clock and memory to store the collected data—in a compact titanium case. This data logging capability frees users to place the sensor in remote sites and let it collect data for long periods. HydroSci software is included and elegantly supports test setup, data retrieval, and data display. Long battery life and rugged construction mean you can trust the CRS456V to collect important data. Low cost and ease of use make it a good choice in a variety of applications. The CRS451V is the same as this, but with a stainless-steel case. 

Category:

The CRS456V has several pressure range options.

HydroSci software is available for download. This software simplifies the process of configuring the CRS456V. Users can configure the CRS456V to monitor surface water, ground water, or a standard pump test.

HydroSci software will display the data in tabular or graphical formats.

Benefits and Features 

    • Sensors and data-collection features in one instrument case 
    • Rugged titanium case protects piezoresistive sensor allowing it to be used in saltwater and other harsh environments 
    • Quality construction ensures product reliability 
    • Fully temperature-compensated 
    • Fast scan rate 
    • Large data-storage capacity 
    • Long battery life 
    • Easy-to-use software 
Venting Vented
Measurement Time < 1.0 s
Input Voltage 6 to 16 Vdc
Output Options micro USB
Internal Data Collection Memory 4 MB
Logging/Scanning Modes Standard, Delta, Wave, Logarithmic
Resolution 0.0035% FS
Dry Storage Temperature Range -10° to +80°C
WARNING: Sensor could be damaged if encased in frozen ice.
Operating Temperature Range 0° to 60°C
WARNING: Sensor could be damaged if encased in frozen ice.
Overpressure 2 x pressure range
Power Requirements Internal user-replaceable lithium battery
Battery Life 5+ years (when logging interval is once per hour; approximately 40,000 measurements)
Body Material Titanium
Distance
  • 2.54 cm (1 in.)
    Distance from black line etched on housing to end of NPT fitting
  • 2.3 cm (0.9 in.)
    Distance from black line etched on housing to end of standard nose cone
  • 9.9 cm (3.9 in.)
    Distance from black line etched on housing to end of weighted nose cone
Water-Level Accuracy ±0.1% full-scale-range TEB
Includes the combined errors due to nonlinearity, hysteresis, nonrepeatability, and thermal effects over the compensated temperature range, per ISA S51.1.
Temperature Accuracy ±0.2°C
Ingress Protection Exceeds IP68
Diameter 2.22 cm (0.875 in.)
Length 22.23 cm (8.75 in.)
Weight 230 g (0.51 lb)
Power Consumption
Quiescent < 80 µA
Measurement/Communication 4 mA (1 s measurement)
Measurement Ranges at Fresh Water Depths
0 to 5.1 m (16.7 ft)
  • 0 to 7.25 psi
  • 0 to 50 kPa
0 to 10.2 m (33.4 ft)
  • 0 to 14.5 psi
  • 0 to 100 kPa
0 to 20.4 m (67 ft)
  • 0 to 29 psi
  • 0 to 200 kPa
0 to 50.9 m (167 ft)
  • 0 to 72.5 psi
  • 0 to 500 kPa
0 to 102 m (334.5 ft)
  • 0 to 145 psi
  • 0 to 1000 kPa

Brochures: CRS456V Titanium Vented Water-Level Recording Sensor

Download

Brochures: CRS451V and CRS456V Submersible Water-Level Recording Sensors

Download

Product reviews

Review CRS456V Titanium Vented Stand-Alone Pressure Transducer

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Write a review
Review CRS456V Titanium Vented Stand-Alone Pressure Transducer
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    Related products

    Cảm biến đo chất rắn lơ lửng soli::lyser

    soli::lyser Suspended Solids Physical Sensor

    Measure the concentration of suspended solids directly in water
    Find out more
    Cảm biến đo thế oxy hóa khử redo::lyser

    redo::lyser Redox Potential Physical Sensor

    On-line measurement of the redox potential immersed in a medium or in a flow cell
    Find out more
    Thiết bị Terminal con::lyte

    con::lyte Terminal

    Find out more
    Cảm biến đo amoni ammo::lyser

    ammo::lyser Pro Ammonium Physical Sensor

    A multiparameter probe for online ammonium measurement
    Find out more
    Đầu dò quang phổ multi::lyser V3

    multi::lyser V3 Spectrometer Probe

    Measure organic carbon and nitrate of surface water, groundwater, drinking water and wastewater
    Find out more
    Đầu dò quang phổ đo độ đục và TSS uv::lyser V3

    uv::lyser V3 Turbidity & Total Suspended Solids Spectrometer Probe

    Ideal for surface water, groundwater, drinking water and wastewater applications.
    Find out more
    Terminal giám sát nước thông minh Con::line

    con::line Water Monitoring Terminal

    The conline is a smart water monitoring terminal designed to seamlessly integrate with the complete Badger Meter sensors offering, M-Nodes and to third-party sensors
    Find out more
    Thiết bị IoT Terminal con::cube V3

    con::cube V3 IoT Terminal

    A versatile terminal for data acquisition and station control
    Find out more

    Subscribe to Content

    If you need to copy the content, please leave your information, and we will respond as soon as possible. Sincerely, thank you!