CRS456 Titanium Stand-Alone Pressure Transducer

Self-Contained Memory, Easy to use software, reliable hardware

The CRS456 consists of a water-level and water-temperature sensor that has its own time clock and memory to store the collected data, in a compact titanium case. This frees users to place the sensor in remote sites and let it collect data for long periods. The sensor can then be retrieved, connected to a PC via a micro-USB port, and the data transferred to the PC. HydroSci software is included and elegantly supports test setup, data retrieval, and data display. Long battery life and rugged construction mean you can trust the CRS456 to collect important data. Low cost and ease of use make it a good choice in a variety of applications. The CRS451 is the same as this, but with a stainless-steel case. 

Category:

The CRS456 has several pressure range options. The CRS456 is unvented; therefore it is monitoring sealed gage pressure. For maximum accuracy, the data should be corrected for barometric pressure.  

HydroSci software is available for download. This software simplifies the process of configuring the CRS456. Users can configure the CRS456 to monitor surface water, ground water, or a standard pump test. 

HydroSci software will also compensate the measurements for barometric pressure using an additional CS456 or a CS451 as a reference sensor, or using a barometric pressure sensor from a nearby weather station. 

HydroSci software will display the data in tabular or graphical formats. 

Benefits and Features 

    • Sensors and data-collection features in one instrument case 
    • Rugged titanium case protects piezoresistive sensor allowing it to be used in saltwater and other harsh environments 
    • Quality construction ensures product reliability 
    • Fully temperature-compensated 
    • Fast scan rate 
    • Large data-storage capacity 
    • Long battery life 
    • Easy-to-use software 
Venting Unvented
Measurement Time < 1.0 s
Output Options micro USB
Internal Data Collection Memory 4 MB
Logging/Scanning Modes Standard, Delta, Wave, Logarithmic
Resolution 0.0035% FS
Dry Storage Temperature Range -10° to +80°C
WARNING: Sensor could be damaged if encased in frozen ice.
Operating Temperature Range 0° to 60°C
WARNING: Sensor could be damaged if encased in frozen ice.
Overpressure 2 x pressure range
Power Requirements Internal user-replaceable lithium battery
Battery Life 5+ years (when logging interval is once per hour)
Body Material Titanium
Distance
  • 2.54 cm (1 in.)
    Distance from black line etched on housing to end of NPT fitting
  • 2.3 cm (0.9 in.)
    Distance from black line etched on housing to end of standard nose cone
  • 9.9 cm (3.9 in.)
    Distance from black line etched on housing to end of weighted nose cone
Water-Level Accuracy ±0.1% full-scale-range TEB
Includes the combined errors due to nonlinearity, hysteresis, nonrepeatability, and thermal effects over the compensated temperature range, per ISA S51.1.
Temperature Accuracy ±0.2°C
Ingress Protection Exceeds IP68
Diameter 2.22 cm (0.875 in.)
Length 22.23 cm (8.75 in.)
Weight 230 g (0.51 lb)
Power Consumption
Quiescent < 80 µA
Measurement/Communication 4 mA (1 s measurement)
Measurement Ranges at Fresh Water Depths
0 to 5.1 m (16.7 ft)
  • 0 to 7.25 psi
  • 0 to 50 kPa
0 to 10.2 m (33.4 ft)
  • 0 to 14.5 psi
  • 0 to 100 kPa
0 to 20.4 m (67 ft)
  • 0 to 29 psi
  • 0 to 200 kPa
0 to 50.9 m (167 ft)
  • 0 to 72.5 psi
  • 0 to 500 kPa
0 to 102 m (334.5 ft)
  • 0 to 145 psi
  • 0 to 1000 kPa

Brochures: CRS456 Titanium Water-Level Recording Sensor

Download

Brochures: CRS451 and CRS456 Water Level and Temperature Recording Sensors

Download

Product reviews

Review CRS456 Titanium Stand-Alone Pressure Transducer

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review CRS456 Titanium Stand-Alone Pressure Transducer
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    Related products

    Cảm biến nhiệt độ nước kỹ thuật số SDI-12 TempVue 50

    TempVue 50 SDI-12 Digital Water Temperature Sensor

    For years of scientific-grade water and soil temperature measurements
    Find out more
    Đầu Dò ORP CSIM11-ORP-L

    CSIM11-ORP-L ORP Probe

    Internal amplifier boosts signal for less interference
    Find out more
    Cảm biến đo độ pH CSIM11-L

    CSIM11-L pH Sensor

    Internal amplifier boosts signal for less interference
    Find out more
    Cảm biến độ dẫn điện và nhiệt độ nước CS547A-L

    CS547A-L Water Conductivity and Temperature Probe

    Corrosion resistant, epoxy housing is durable and easy to clean
    Find out more
    Cảm biến oxy hòa tan CS511-L

    CS511-L Dissolved Oxygen Sensor

    Widely compatible, submersible, rugged, low-maintenance DO sensor
    Find out more
    Cảm biến mực nước bằng Radar CS475A-L

    CS475A-L Radar Water-Level Sensor

    Non-contact water level monitoring, FCC approved for outdoor use
    Find out more
    Cảm biến áp suất titan CS456

    CS456 Titanium Pressure Transducer

    Ideal for long-term deployment in harsh conditions
    Find out more
    Cảm biến đo áp suất CS451

    CS451 Stainless-Steel Pressure Transducer

    Stainless Steel, ideal for long-term deployment in harsh conditions
    Find out more

    Subscribe to Content

    If you need to copy the content, please leave your information, and we will respond as soon as possible. Sincerely, thank you!