Mô-đun Đầu vào Cổng Dòng điện 100 Ohm CURS100
Mô-đun Đầu vào Cổng Dòng điện 100 Ohm
Mô-đun Đầu vào Cổng Dòng điện 100 Ohm CURS100
Mô-đun Đầu vào Cổng Dòng điện 100 Ohm

CURS100 100-Ohm Current Terminal Input Module

Expands capabilities, allows data logger to measure additional types of sensors

9 ₫

The CURS100 enables your Campbell Scientific data logger to measure a sensor or output device that outputs a current signal (for example, 4 to 20 mA). It converts the current signal to a voltage signal.

Benefits and Features

    • Easy to install or remove
    • Connects directly into data logger input terminals
    • Low power consumption
Category:

The CURS100 uses a 100 Ω resistor for the current shunt that allows currents up to 25 mA to be read on a ±2500 mV range (CR10X, CR510) and currents up to 50 mA to be read on a ±5000 mV range.

Schematic for CURS100

Schematic for CURS100

CURS100-to-Sensor Hookup

CURS100-to-Sensor Hookup

 

Used With Sensors that output a current signal (4 to 20 mA)
Resistance 100 Ω (shunt—bulk metal foil)
Tolerance ±0.01% (@ 25°C)
Power Rating 0.25 W
Maximum Temperature Coefficient ±0.8 ppm/°C
Dimensions 1.5 x 1.5 x 2.7 cm (0.6 x 0.6 x 1.0 in.) for body with prongs
Weight 6 g (0.2 oz)

Manuals: CURS100 100 Ohm Current Shunt Terminal Input Module

Download

Product reviews

Review CURS100 100-Ohm Current Terminal Input Module

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Write a review
Review CURS100 100-Ohm Current Terminal Input Module
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    Related products

    Skyspec instruments

    Passive remote sensing of atmospheric particles and gases
    Find out more
    OPEN PATH

    Open-path active remote sensing instrument

    Fast and accurate spectral trace gas measurements using active spectroscopy
    Find out more
    Hệ thống phân tích NO2-NOx-NO ICAD Series 210DL

    ICAD NO2-NOx-NO Analyzer SERIES 210DL

    Patented, fast, accurate and direct nitrogen dioxide detection
    Find out more
    Hệ thống phân tích ICAD-HONO/NO2-200L

    Icad HONO-NO2 Analyzer series 210

    Patented, fast, accurate and direct hono and no2 detection
    Find out more
    Bộ thu thập và xử lý dữ liệu Granite 10

    Granite 10 Measurement and Control Data-Acquisition System

    Ideal for automotive testing applications, featuring CAN bus and CAN FD output
    Find out more
    Mô-đun Đầu vào Cổng Dòng điện 100 Ohm CURS100

    CURS100 100-Ohm Current Terminal Input Module

    Expands capabilities, allows data logger to measure additional types of sensors
    Find out more
    Datalogger ba kênh cho cảm biến dây rung CRVW3-NE

    CRVW3-NE Three-Channel Vibrating Wire Datalogger without Enclosure

    Vibrating Wire Data Logger Using patented VSPECT™ technology
    Find out more
    Bộ Ghi Dữ Liệu Dây Rung Ba Kênh CRVW3

    CRVW3 Three-Channel Vibrating Wire Datalogger

    Self-Contained Vibrating Wire Data Logger Using patented VSPECT® technology
    Find out more

    Subscribe to Content

    If you need to copy the content, please leave your information, and we will respond as soon as possible. Sincerely, thank you!