BaroVue 10 Digital Barometer

Perfect for Environmental and Meteorological Applications

The BaroVue™10 is a highly accurate barometer that can measure pressures over a range of 500 to 1100 hPa and can be used in a range of applications that includes meteorology and hydrology. This sensor includes our zero downtime recalibration. Other sensors on the market need to be taken offline and sent back to the manufacturer to be recalibrated, often for weeks at a time, causing a loss in valuable data and time, as well as an additional expense.  

The sensor card for the BaroVue 10 is pre-calibrated. Replacement sensor cards are also pre-calibrated, requiring only one trip to the field station and no downtime. The design of the BaroVue 10 allows you to remove and replace your sensor card quickly and easily without either having to disassemble the equipment in the enclosure or having to send the equipment back to the manufacturer. 


The BaroVue 10 is a low-power, digital barometer (-40 to +60°C) that provides best-in-class accuracy and stability (±0.1 hPa/yr) over the entire pressure and temperature range. It can run continuously and does not require power cycling unlike other products in this category. The digital output is both SDI-12 and RS-232, which reduces noise and measurement uncertainty compared with analog sensors, and makes the BaroVue 10 compatible with all Campbell Scientific SDI-12 devices. Moreover, this barometric pressure sensor can be installed and integrated into many new and existing weather stations. The transducers used in the BaroVue 10 are direct-to-digital sensors, and no reconversion takes place inside the barometer. 

Benefits and Features 

    • Highly reliable measurements (multiple cells) 
    • Direct-to-digital measurements 
    • Very low noise 
    • Integrated identification and diagnostics 
    • Zero downtime/recalibration 
    • Easy firmware updates 
    • Cost effective 
    • SDI-12 device 
-NOTE- These specifications assume the recommended desiccation is used.
Pressure Range 500 to 1100 hPa
Temperature Range -40° to +60°C
Supply Voltage 9 to 28 Vdc
Elevation ~609.6 m (2,000 ft) below sea level (as in a mine) to 4,572 m (15,000 ft) above sea level
Current Consumption
  • < 5 mA (active)
  • 200 µΑ (sleep mode)
Digital Output SDI-12, RS-232 serial
Pressure Fitting Barbed fitting for 0.318 cm (0.125 in.)
Dimensions 2.2 x 9.0 x 10.2 cm (0.87 x 3.54 x 4.02 in.)
Weight 226.8 g (0.5 lb)
Calibration Uncertainty ±0.15 hPa
Uncertainty ±0.3 hPa (at 20°C)
Total Uncertainty ±0.5 hPa (at -40° to +60°C)
Long-Term Stability ±0.1 hPa/yr
Power Supply Rejection Negligible
Measurement Noise 0.05 hPa (RMS)
Resolution 0.1 hPa

Brochures: BaroVue™10 Digital Barometer


Product reviews

Review BaroVue 10 Digital Barometer

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review BaroVue 10 Digital Barometer
Choose a image
0 character ( Minimum of 10)

    There are no reviews yet.

    No comments yet

    Related products

    Cảm biến đo tầm nhìn khí quyển CS120A

    CS120A Atmospheric Visibility Sensor

    High-Performance Visibility Measurements
    Find out more
    Cảm biến dòng điện xoay chiều

    CS11-L AC Current Sensor

    Measure the ac Current along an Electrical Wire
    Find out more
    Cảm biến đo áp suất khí quyển CS106

    CS106 Barometer

    Wider Pressure Range, Resides inside weatherproof enclosure
    Find out more
    Cảm biến đo áp suất khí quyển CS100

    CS100 Barometric Pressure Sensor

    Standard Barometer, resides inside a weather-proof enclosure
    Find out more
    Cảm biến đo mực nước và nhiệt độ nước CRS456V 

    CRS456V Titanium Vented Stand-Alone Pressure Transducer

    Pressure Transducer Combined with a Recorder, High resolution and accuracy
    Find out more
    Cảm biến áp suất CRS456

    CRS456 Titanium Stand-Alone Pressure Transducer

    Self-Contained Memory, Easy to use software, reliable hardware
    Find out more
    Cảm biến áp suất

    CRS451 Stainless-Steel Stand-Alone Pressure Transducer

    Self-Contained Memory, Easy to use software, reliable hardware
    Find out more
    Hệ thống đo lường luồng khí theo phương pháp eddy-covariance

    CPEC310 Expandable Closed-Path Eddy-Covariance System with EC155, Pump Module, and Automatic Zero and Span

    Fully Expandable Design, Provides additional ports with automatic zero and span
    Find out more
    error: Content is protected !!