Static Pressure Heads SPH10/20

Giúp giảm thiểu tác động của gió lên số đo áp suất khí quyển

9 ₫

Variations due to strong and gusty wind can be overcome by using a static pressure head to ‘filter out’ the effect of dynamic pressure. The Vaisala Static Pressure Head Series SPH10/20 are designed to minimize the errors caused by wind. The wind tunnel tested structure is both horizontally and vertically symmetrical. When the SPH10/20 accessory is combined with one of Vaisala’s barometric pressure sensors, such as the PTB210, the design ensures reliable barometric pressure measurements in all weather.

Category: Uncategorized

Ideal for Outdoor Installations

Composed of ultraviolet stabilized PC plastics and offshore aluminium, the SPH10/20 static pressure heads are durable and weather resistant. The SPH10/20 protects against moisture with drain holes in the lower plate that allow rain and water to flow out. It also has internal netting that prevents insects and debris from blocking the pressure channel.

Ease of installation and carefree maintenance

The SPH10/20 static pressure heads are easy to install and disassemble, service, and clean – even at the installation site.

Reliable barometric pressure measurement in all weather

Barometers such as the Vaisala BAROCAP® PTB210 can be installed directly on top of the SPH10/20 static pressure head for outdoor pressure measurement. Other barometers can be connected to the heads with pressure tubing

Product reviews

Review Static Pressure Heads SPH10/20

5 0% | 0 review

4 0% | 0 review

3 0% | 0 review

2 0% | 0 review

1 0% | 0 review

Write a review

Review Static Pressure Heads SPH10/20

There are no reviews yet.

No comments yet

Operating Environment
Operating temperature	Operating temperature -60 … +80 °C (-76… +176 °F)
Mechanical Specifications
Weight	SPH10: 800 g (1.76 lb) SPH20: 1360 g (3.0 lb)
Materials	PC plastic, offshore aluminium
Mounting	With 2 bolts (M6 × 20 mm min.)
Hose connection	Barbed fitting for 4 mm I.D. hose or Rp1/4 thread (parallel)
SPH20 Inputs and Outputs
Electrical connections	M12 connector
Power supply	Factory setting: 12 V Changed connection: 24 V
Power consumption during heating	70 W
Thermostat Switching Temperature
On	+4 °C (±3 °C) +39.2 °F (±4.4 °F)
Off	+13 °C (±3 °C) +55.4 °F (±4.4 °F)

Ideal for Outdoor Installations

Ease of installation and carefree maintenance

Reliable barometric pressure measurement in all weather

Static Pressure Head Series SPH10/20 Datasheet

Product reviews

Review Static Pressure Heads SPH10/20

Related products

WXT536 Multi-Parameter Weather Sensor

WXT535 Multi-Parameter Weather Sensor

WXT534 Multi-Parameter Weather Sensor

Weather Transmitter WXT530 Series

PTU300 Combined Pressure, Humidity and Temperature Transmitter