Thiết bị thu thập và xử lý dữ liệu Granite 10

Thiết bị thu thập và xử lý dữ liệu Granite

Granite 10 Measurement and Control Data-Acquisition System

Ideal for automotive testing applications, featuring CAN bus and CAN FD output

9 ₫

Similar to the Granite™9, the Granite™10 is the most computationally powerful data-acquisition device from Campbell Scientific. As an all-digital measurement and control DAQ, the Granite 10 is designed as the core of the data-acquisition network, integrating with all GRANITE™ measurement modules, including the Volt 108, Volt 116, Temp 120, VWire 305, and CH400. Unlike the Granite 9, however, the Granite 10 also includes four general-purpose CAN channels. With its CAN channels, a larger 128 GB SSD, and extended temperature ranges, the Granite 10 is your ultimate tool for automotive testing.

Category: Uncategorized

The Granite 10 enables you to perform the following:

- Standard measurement functions
- Advanced math and processing functions
- Control functions

Benefits and Features

- Traditional network connections via Ethernet port
- EPI port switch for high-speed connection to all GRANITE measurement modules
- Onboard storage of streaming data with 2 GB of DDR3 SDRAM and a 128 GB solid-state hard drive (SSD)
- Built-in GPS for network synchronization
- General-purpose CAN channels

Product reviews

Review Granite 10 Measurement and Control Data-Acquisition System

5 0% | 0 review

4 0% | 0 review

3 0% | 0 review

2 0% | 0 review

1 0% | 0 review

Write a review

Review Granite 10 Measurement and Control Data-Acquisition System

There are no reviews yet.

No comments yet

-NOTE-	Additional specifications are listed in the GRANITE 10 Specifications.
Power Requirements	9.6 to 32 Vdc (voltage input)
Real-Time Clock Accuracy	±3 min. per year
Operating Temperature Range	-40° to +70°C (standard) -55° to +85°C (extended) Non-condensing environment
Case Material	Stainless steel 304 and aluminum 6061
Pulse Counters	8 (C1 to C8)
Communications Ports	CAN FD CAN Ethernet USB Micro B USB host CS I/O 0 to 5 V serial SDI-12 RS-485 RS-422 CPI/RS-232 EPI
Data Storage Ports	microSD USB host
Digital I/O	8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
Internet Protocols	Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP
Communication Protocols	CAN FD, CAN, CPI, EPI, PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI
Warranty	3 years standard (against defects in materials and workmanship) Optional: An additional 2 years (against defects in materials and workmanship), bringing the total to 5 years
Battery-backed SRAM for CPU Usage & Final Storage	4 MB
Data Storage	4 MB SRAM + 128 MB NOR flash (Storage expansion of up to 16 GB with removable microSD flash memory card.) 128 GB SSD
Active Current Drain, Average	~6 W 255 mA input (24 V input) 495 mA input (12 V input)
Static Vibrating-Wire Measurements	Not supported
Dimensions	21.4 x 12.0 x 7.5 cm (8.4 x 4.7 x 3.0 in.) Additional clearance required for cables and leads.
Weight	1.2 kg (2.7 lb)

Brochures: Granite 10 Measurement and Control Data-Acquisition System

Brochures: GRANITE 10 Specifications Sheet

Product reviews

Review Granite 10 Measurement and Control Data-Acquisition System

Related products