CS475A-L Radar Water-Level Sensor

Non-contact water level monitoring, FCC approved for outdoor use

The CS475A radar sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission and return of the pulses. The elapsed time measurement is used to calculate the distance between the sensor and the target (for example, water, grain, slurry). The distance value can then be used to determine depth of the medium. 

The CS475A outputs a digital SDI-12 signal to indicate distance and stage. This output is acceptable for recording devices with SDI-12 capability, including Campbell Scientific data loggers. 

Category:

Features of the SDI-12 version 1.4 functionality: 

    • M! commands return stage, distance, voltage, and error codes 
    • SHEF coded meta data 

Benefits and Features 

    • Meets USGS Office of Surface Water (OSW) requirements for accuracy 
    • SDI-12 version 1.4 functionality 
    • Makes 1 Hz measurements 
    • Monitors tides for NOAA physical oceanographic real-time systems (PORTS) 
    • Easy to set up and configure over USB or SDI-12 
    • FCC compliant (FCC IC# MOIPULS 616263); individual FCC license not required 
    • Low maintenance—no moving parts significantly reduces maintenance cost and time 
    • Low power mode available 
    • Rugged enough for harsh environments—IP68 rating 
    • Optional display available
Measurement Description Distance
Output Options SDI-12
Measurement Range 0.5 to 35 m (1.6 to 114.8 ft)
Accuracy ±2 mm (±0.0065 ft)
Resolution 1 mm (0.0033 ft)
Communications Output SDI-12 version 1.4
Radar Frequency K band (~26 GHz)
Pulse Energy 1 mW (maximum)
Beam Angle 10°
Input Voltage 9.6 to 32 Vdc
Surge Protection 1.5 KVA
Operating Temperature Range -40° to +80°C
Vibration Resistance Mechanical vibrations with 4 g and 5 to 100 Hz
Mechanical Rating IP66/68
Housing Material Aluminum
Horn Material PVDF plastic
Measurement Time
  • < 1.0 s (normal power mode)
  • 60.0 s + (5 • Integration Time) + (Measurement Time) (low power mode)
Housing Height 129 mm (5.1 in.)
Horn Diameter 115 mm (4.5 in.)
Horn Height 122 mm (4.8 in.)
Weight 2 kg (4 lb)
Nominal Current Drain
Normal Power Mode
  • < 5 mA (sleep state)
  • < 7 mA (measurement state)
Low Power Mode
  • < 550 μA (sleep state)
  • < 7 mA (measurement state)

 

Brochures: CS475A Radar Water Level Sensor

Download

Manuals: CS475A Quick Deploy Guide

Download

Manual: CS475A Radar Water Level Sensor

Download

Product reviews

Review CS475A-L Radar Water-Level Sensor

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review CS475A-L Radar Water-Level Sensor
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    Related products

    Skyspec instruments

    Passive remote sensing of atmospheric particles and gases
    Find out more
    OPEN PATH

    Open-path active remote sensing instrument

    Fast and accurate spectral trace gas measurements using active spectroscopy
    Find out more
    Hệ thống phân tích NO2-NOx-NO ICAD Series 210DL

    ICAD NO2-NOx-NO Analyzer SERIES 210DL

    Patented, fast, accurate and direct nitrogen dioxide detection
    Find out more
    Hệ thống phân tích ICAD-HONO/NO2-200L

    Icad HONO-NO2 Analyzer series 210

    Patented, fast, accurate and direct hono and no2 detection
    Find out more
    Cảm biến mực nước radar RangeVue 30

    RangeVue 30 SDI-12, Radar Water-Level Sensor

    Non-Contact Water-Level Monitoring, Distance up to 30 meters
    Find out more
    Cảm biến mực nước radar RangeVue 15

    RangeVue 15 SDI-12 radar water level sensor

    Non-contact water-level monitoring, distance up to 15 meters
    Find out more
    Thiết bị Edge Device Aspen 10

    Aspen 10 Edge Device for a Single Sensor

    Makes a Sensor IoT Cloud Connected
    Find out more
    Bộ thu thập và xử lý dữ liệu Granite 10

    Granite 10 Measurement and Control Data-Acquisition System

    Ideal for automotive testing applications, featuring CAN bus and CAN FD output
    Find out more

    Subscribe to Content

    If you need to copy the content, please leave your information, and we will respond as soon as possible. Sincerely, thank you!