105E-L Type E Thermocouple Burial Probe

Rugged, accurate, versatile, can be used in a variety of applications

The 105E consists of a 24-gage, shielded, type E thermocouple wire that typically is used to measure soil temperature. Because the thermocouple junction is electrically isolated from the media being measured, you can avoid measurement errors caused by differences in ground potential. 

Category:

Type E thermocouples are comprised of a chromel wire and a constantan wire joined at a measurement junction. A voltage potential is generated when the measurement end of the thermocouple is at a different temperature than the reference end of the thermocouple. The magnitude of the voltage potential is related to the temperature difference. Therefore, temperature can be determined by measuring the differences in potential created at the junction of the two wires. 

A reference temperature measurement (typically measured at the data logger wiring panel) is required. Options for measuring the reference temperature include: 

    • Thermistor built into the CR6, CR800, CR850, CR1000, CR3000, or CR5000 wiring panel 
    • PRT built into the wiring panel of the CR9050 or CR9051E input module for the CR9000X Measurement and Control System 

Benefits and Features 

    • Junction is electrically isolated from the soil, thereby avoiding measurement errors due to differences in ground potential 
    • Compatible with most Campbell Scientific data loggers 
Type Chromel-Constantan
Typical Output 60 μV/°C
Accuracy Refer to the Thermocouple Measurement section in the data logger manual.
Operating Temperature Range -55° to +125°C (of TPE outer jacket)
Probe Diameter 0.8 cm (0.3 in.)
Plug Dimensions 1.8 x 3.3 x 1.0 cm (0.7 x 1.3 x 0.4 in.)
Weight 90 g (0.2 lb) with 3.05-m (10-ft) cable

105E Type E Thermocouple Burial Probe

Download

Product reviews

Review 105E-L Type E Thermocouple Burial Probe

5 0% | 0 review
4 0% | 0 review
3 0% | 0 review
2 0% | 0 review
1 0% | 0 review
Review 105E-L Type E Thermocouple Burial Probe
Choose a image
0 character ( Minimum of 10)
    +

    There are no reviews yet.

    No comments yet

    Related products

    Cảm biến đo tầm nhìn khí quyển CS120A

    CS120A Atmospheric Visibility Sensor

    High-Performance Visibility Measurements
    Find out more
    Cảm biến dòng điện xoay chiều

    CS11-L AC Current Sensor

    Measure the ac Current along an Electrical Wire
    Find out more
    Cảm biến đo áp suất khí quyển CS106

    CS106 Barometer

    Wider Pressure Range, Resides inside weatherproof enclosure
    Find out more
    Cảm biến đo áp suất khí quyển CS100

    CS100 Barometric Pressure Sensor

    Standard Barometer, resides inside a weather-proof enclosure
    Find out more
    Cảm biến đo mực nước và nhiệt độ nước CRS456V 

    CRS456V Titanium Vented Stand-Alone Pressure Transducer

    Pressure Transducer Combined with a Recorder, High resolution and accuracy
    Find out more
    Cảm biến áp suất CRS456

    CRS456 Titanium Stand-Alone Pressure Transducer

    Self-Contained Memory, Easy to use software, reliable hardware
    Find out more
    Cảm biến áp suất

    CRS451 Stainless-Steel Stand-Alone Pressure Transducer

    Self-Contained Memory, Easy to use software, reliable hardware
    Find out more
    Hệ thống đo lường luồng khí theo phương pháp eddy-covariance

    CPEC310 Expandable Closed-Path Eddy-Covariance System with EC155, Pump Module, and Automatic Zero and Span

    Fully Expandable Design, Provides additional ports with automatic zero and span
    Find out more
    error: Content is protected !!