microF

• 10 ppb (with default settings)

• 0 – 300 ppb (other range on request)

• Detector : PhotoMultiplier
• Temporal resolution : 1 to 120 seconds
• Response time : 10 minutes (with default settings)
• Condition : Gas T°: 5 – 40°C; Gas RH: 20 – 80%; Atmospheric pressure
• Calibration : Gaseous Formaldehyde or liquid solution

Sampling

• Method : Continuous flow
• Gaz flow rate : 0 – 30 mL min-1 (default setting 20 mL min-1)
• Gas flow rate uncertainty : ± (1.5% Read + 0.5% Full Scale)
• Liquid flow rate : 0 – 400 μL min-1 (default setting 20 μL min-1 )
• Supply connection : 1/8’’ for gas; 1/16’’ for liquid

• Power supply : Input 100 – 240V ±10%; 1.5 A max; 47 – 63 Hz / Output 15V; 6.67A 100W
• Battery life : Lithium-Ion / Autonomy > 2h
• Power consumption : max 75 w

• Operational conditions : 0 – 40°C / 20 – 80% RH
• Storage conditions : 0 – 40°C / 0 – 85% RH
• Display : 7” TFT display; resolution 800 x 480; integrated touchscreen
• Autonomy: 2 hours
• Fluoride liquid autonomy: (100ml): 80 hours

• Expert and standard modes; Data saving; Analysis setting, launching and monitoring; Defects and maintenance management
• USB : Data transfer (aera, retention time, concentration)
• Ethernet : Communication and remote control

• Carrier case with handle and integrated pre-cut foam for accessories
• DNPH tubes and rings; Power supply & cable; Particle filter;
• Filter strainer; Carrier case with pre-cut foam; Microporous tube; 100 mL bottles with each storage and analysis caps with ferrules, 1/8’’ & 1/16’’ inox caps with associated ferrules; Teflon tubes and associated ferrules; Bottle holder; Stylus.