Sediment Corer

This post is also available in: viVietnamese

Tube-shaped bottom sampler for soft and sandy grounds
The Sediment Corer is easy to handle and can be operated manually in shallow waters with a push rod or on a rope simply using gravity in greater water depths. During descent the plastic valve flap on top of the transparent plexiglass tube is held open to let the water flow freely through the tube. To retrieve the sample the corer is lifted from the sediment and the water pressure at the valve flap closes the tube. A vacuum is holding the sediment sample in place and is preventing washout.
Out of the water the provided piston is put into the lower end of the tube. The tube holder with rope stirrup is taken off and the tube with the core sample is placed onto the piston. When the tube is now pressed onto the piston the core sample will be removed for examination.

  • Technical Data
  • Ordering Information
Material stainless steel, PVC, plexiglass
Dimensions 100 mm dia. x 1000 mm length
Core tube size 600 mm length, 70 mm inner dia.
Weight 6 kg
Products
437 400 Sediment Corer incl. transparent 
plexiglass core tube
Accessories
437 410 Transverse Bar to be fixed onto 
the stirrup for sampling by hand
Spare Parts
437 405 Replacement Core Tube, 
made of plexiglass
437 406 Special Core Tube, 
made of stainless steel

Leave a Reply

Your email address will not be published. Required fields are marked *